Wrought Iron - Armor Fence & Masonry. Armor Fence and Masonry is Mohave County\'s Block Wall, Wrought Iron and Fence Company. In Business for More Than 30 Years You can be Assured your Masonry, Wrought Iron or Fence project will be Done Right The First Time. Call Armor Fence Today for a Free Quote for your Block Wall, Chain Link Fence or Wrought.
Wrought iron fences add a certain elegance to a home. They come in a variety of heights from about knee high to six feet or more. The iron is heavy and the posts need to be set properly to hold the weight in place.
I want to add a 16" "wrought iron" fence to the top of a low cinder block wall along my driveway. The wall is filled and topped with red brick. I could just use anchor bolts of some kind, but I know this fence will be leaned on etc. by neighbor kids, so I would like to sink the 'posts' through the brick cap and into the top of the wall several inches.
Wrought iron fencing provides a sturdy, stylish addition to a yard while also offering some function, such as containing a pet to a certain area. You can add it to the border of your yard or use ...
According to the size of the iron panels of the fence, you will have to place the holes accordingly. Zoning laws require the posts to be secured by concrete or cinder blocks. When you dig the holes, and insert the panels, you will have to anchor the posts in concrete.
It is a cinder block wall with a metal/wrought iron(?) gate tenants have pulled the bolt braces out of the cinder block wall. ... How do I re-attach a metal gate to a cinder block wall? ... Attach metal anchors to support the bolts of the gate and your set. brawnbody · 8 years ago . 3. Thumbs up. 1. Thumbs down. Report Abuse ...
Wrought Iron Fence There are two different ways to install a wrought iron fence on top of a wall. 1. Core Drill: Once again, this is the recommended and most secure method. Use the core drill to bore out a hole at least a little larger than the diameter of the post. The depth of the hole should be at least 4".
Iron Flange Post for Surface Mounting. The first is a flange post. Our iron posts have a 5″ square flange welded to the bottom of a steel post with 4 holes drilled for mounting. As you can see in the photo, it’s basically a ‘foot’ welded to the post bottom that allows it to stand freely and be bolted to a flat surface.