If you want to cover the face of the framing with fascia, install the fascia first. Then, drill holes and drive the railing post bolts. Once all the railing posts are installed, you are ready to lay the decking. After the decking is finished, it will be time to install the top and bottom rails, balusters, top cap and any other parts.
When that happens, you attach deck railings with a pair of deck railing mounts as the final step in attaching the deck rails. Railing safety is always a concern, so be sure to attach the railing mounts to the wood sheathing under any wood or vinyl siding.
Expert Reviewed. How to Build a Deck Railing. Four Parts: Installing Posts Measuring and Cutting the Wood Assembling the Balusters Installing the Rail Community Q&A Adding a railing to your deck is a great way to give it a finished look. The project’s not as complicated as it might seem, either.
Porch railing height and porch design are extremely important. The height of your porch railing will determine if your house has curb appeal or is just a clown house. Porch railing height of 3 feet or more will destroy the look of your house and all your hard work.
The 2×2 pickets (also called balusters) are cut and installed to complete the new deck rail. This project is continued from How to Build Code Compliant Deck Railing Part 1.Also see How to Repair a Sagging Wood Deck for the project series introduction.. How to Build Code Compliant Deck Railing Part 2
When building handrails for a wood deck, make sure to check your local building codes first to find out the acceptable railing height, space between balusters, and distance between posts that is required.
Canada REsidential Rail Height and Dimensions. Guards are required when then deck is 24" (60 cm) above grade. The minimum height of the railing varies based on the height of the deck. Decks 24" to 5-10" (180 cm) need 36" guards and anything above 5-10" requires a 42" high railing.
Porch rail heights generally range from 30 inches to 42 inches, but the most common sizes are 36 to 42 inches. Porch rail kits contain rail heights in the 36 to 42 inch range.
Position the board between the two posts on edge, with the narrow side of the board flush with the top of each post and the wider side flush with the front edge of the post (facing the center of the deck). Attach each rail to the posts, using 3-inch deck screws. This board will act as a top rail to receive the balustrades.
If you put a 36" high railing where none is required, your fine too. You put a 30" railing in, and the inspector will not care if it's required. He has a piece of paper that says railing must be 36" high, and so he will red flag you on it. If you explain that the railing is not required, he will just tell you to take it out, or make it to code.
Proper porch railing height is an important factor in the overall design and look of your front porch and house. The porch gives a first impression of the house because it is one of the most noticeable parts of the structure.