Linear footage is a measure of length, one foot is one linear foot. Linear footage measurements do require a straight line measurement. Lumber, fencing, and fabrics are commonly sold by the linear foot.
Once you have the square footage of the deck, you need to find the square footage of the board you’ve selected in feet. To find this multiply the width of the floor-board in feet times the length in feet. You can use our feet and inches calculator to convert the board width in inches to feet.
For example, imagine that the remaining area of the room forms a triangle 7 feet long and 3 feet wide. Multiply each triangle's length by half of its width. For example, half of 7 times 3 is 10.5.
The width of a trailer is based on 98 inches, as per the Linear Foot Rule in the Rules and Guidelines Menu option. Length: The length of each Unit. As with Width, if the freight hangs over the edge of a pallet, then the length must be set to the actual longest amount the freight hangs over.
Divide the total number of board inches by 12 to determine the linear board-feet measurement. For example, if our 96-inch deck length by 29 deck boards equals 2,784 board inches, then the board feet will be 232 linear feet (2,784 / 12 = 232).
If the area you are decking is not a simple rectangle then you will need to divide it into ‘rectangles’ and calculate each area individually. Step 2 The number of boards required depends on the chosen board length (2.4m or 4m) and the direction the boards are laid.
Find the price of each type of material (per foot) and multiply by the total linear foot value obtained for the type of material to find the approximate cost of the material.  In the bookshelf example, you need 32 feet of 2x4 boards and 20 feet of 1x12 boards.
For example, if you have a piece of flooring that’s 5 feet long and 18 inches wide, it would be 5 linear feet. If you choose a piece that’s 12 inches wide and 5 feet long, it’s still 5 linear feet. How to measure linear feet. To determine linear footage, start by measuring the length in inches. Then divide the total inches by 12.
A linear foot is a measurement which is used to calculate the total length of a wall without concern for its height or any other factor. To calculate your total wall space in linear feet, you will require a bit of mathematical ability and some basic tools.
For the deck size example provided above, of 200 square feet, you would need 25 boards of this size. But the gaps between your boards must be taken into consideration, too. If you were to use 25 boards, 23 of them would have a 1/8-inch gap, but the outer two pieces would not.
Get a Veranda Enclave railing material estimate for your deck or porch project quickly! Simply enter the total linear feet of rail you need and how many steps on your project. The calculator will give you estimated rail, bracket and post sleeve amounts. You can even email the results to yourself.
This deck will require 32 rows of decking boards. 2- Calculate the total decking board lineal meters. Next, we need to work out the total lineal metres of decking required. Multiply the “number of rows” by the length of the deck again ensuring to allow for the fascia and the overhangs on both sides of the deck.
To calculate square footage of rectangular floor space, determine the length and width of the rectangular space in feet, then multiply them together. If floor space is not a perfect rectangle, break the space up into rectangles, calculate the area of each rectangle, and find the sum of the combined areas.
Building your own deck is a rewarding home project that enhances your family's living space while also increasing the value of your home. Taking on this challenge allows you to design the deck of your dreams and to use those plans to determine how much decking material you'll need.
Trestlewood makes no representations or warranties whatsoever relative to the accuracy of this calculator (or any of its other calculators) and accepts no liability or responsibility for results obtained from same.