Instructions to install UPM ProFi Deck wood plastic composite terrace with Rail Step. Always follow the installation instructions to ensure that the deck is properly …
Enhance composite decking is made from 95% recycled content and is easy to cut and drill with standard tools. Composite decking is made from a mixture of wood fibers and plastic …
4. Set the plank onto the deck, and use a putty knife to slip it under any existing metal flashing. 5. Measure to ensure the first deck board is parallel with the outer edge of the deck. 6. Fasten the deck board with composite decking screws along the edge closest to house; drive one screw into each joist. 7.
Clean your deck as often as needed, at least twice each year. Use extreme caution with pressure washers and use at pressures less than 3,000 psi at 10" above deck surface. Wash in the direction of the grain pattern to avoid possible damage to the boards.
2: Fix decking boards to joists. Our compsite decking boards are easily fastened to the joists of a supporting substructure with the help of our stainless steel screw and plastic T-Clip system. Start at the outside of the area to be decked. Place your first board and screw it into each joist it crosses using a row of starter clips.
Composite decking holds up much better than traditional wood decking. It needs very little, if any, repair work. All composite decking needs is some cleaning once in a while to keep it looking good. Cleaning a composite made deck is easy. It takes only a couple of hours depending on the size of your deck.
Wash Safe Spray and Clean Composite Deck Cleaner; Resist Mist Composite Deck Cleaner; Corte Clean; Super Deck Composite Deck Cleaner; Thompson’s Water Seal—Oxy Action; Dirt, Grime, Tannin and Mildew Stains. wood/plastic composite products are formulated to inhibit mildew growth and minimize staining. Rinse off your products periodically with a hose.