it'd be better with a tile saw. you'd get a virtually chip free and dust free cut. if you have only 1 or a few, take them to home dept and they'll do the cuts for $.25/each.
Line up the threshold with the blade where you'll make the cut. Push the marble into the blade carefully. Do not exert force; let the blade chew into the marble, pulling it along as it does so.
Installing Marble Thresholds June 27, 2012. ... Start by cleaning the area by either sweeping or vacuuming to ensure that all debris is out of the way before you install the thresholds. 6) Next, you are going to want to spread a thin layer of the thinset directly onto the area where you wish to install the threshold. You can use the trowel that ...
When you have a doorway transition with two different types of material separated by the door, you'll benefit from the use of a threshold. In tile installations, these thresholds come in a variety ...
In tile installations, these thresholds come in a variety of materials, such as marble, cultured marble and other composites. While there are differences in the various types of tile thresholds, the installation is the same for all of them.
This feature is not available right now. Please try again later.
First, place the piece of marble for the threshold along the doorway, in the spot you plan to install it. This is done to see if it fits, or if you must cut it to make it fit. With a pencil, mark the place on the marble where the piece of threshold lines up with the doorway.
When tiling a floor which lies next to an existing flooring in another room, you are going to need some kind of tiling threshold or transition piece to join ...
Thresholds can present a tripping hazard if not installed properly or are of exceptional size. So come and find out the ADA requirements for marble thresholds and they're importance.
The tool you need to cut a piece of marble for a threshold is a tile wet saw. Before you turn on the saw, make sure there is enough water in the holder under the saw blade. Then, line up your marble threshold piece carefully, making sure the blade is on the mark you made with your measurements.
Installation Tools and Materials. It took only a single trip to the hardware store; I was really happy to see a significant variety of marble threshold widths, even some tapered on one or both sides. The length was a concern as well, of course but much less so.
When it comes to cutting marble thresholds you will need a blade which can deal with the high strength of marble. You can use tools such as a tile cutter, or a tile wet saw, ensuring a clean and chip free finish to your marble threshold.
Finish your elegant design with tile accessories for a cohesive look. Built from travertine and marble, each of these tile thresholds is durable and able to withstand traffic.
Use masking tape to mark polished marble thresholds, or a simple pencil line on tumbled marble to guide your cuts. Cutting With a Wet Saw A wet saw is the best tool for cutting marble and other types of natural stone.
The transition between tile and carpet is the last step in most tile installation projects. It’s the final touch that can give your work an elegant and thorough look.
I had a couple issues of the thresholds setting a little uneven or even lateral movement and the weights (3 x 45 pound plates) basically have cured all. DMoore Jun 18 '14 at 19:22 I have the same problem here, I can't use thinset because of the extra thickness so I'm thinking on using a PU adhesive (used in constructions) or maybe an epoxy compound (used to bind screws to concrete).
How to Cut Marble. Marble is a type of natural stone often used for countertops and tiling. To cut a slab of marble, you need a wet saw with a diamond blade and proper safety equipment.
Use your 1/4-inch notched trowel to spread an even layer of thinset in the area where you will be installing your threshold. In addition, use the flat side of your trowel to skim-coat the back of your marble threshold with an even layer of thinset.
A test cut will get you acclimated to how the grinder feels and how it reacts to hitting the marble. Cut the top "attractive" surface first (after you've made your test cut). This will allow you a nice, hard edge in the event that the end piece falls or is broken by the grinder.