There are now other composite deck material providers that may very well provide better products and service. ... The boards are cracking and peeling. ... I put new Seventrust Composite Decking on new ...
I am expanding my deck, which is 8 years old in conjunction with a major landscape plan. I used a composite deck material, which has faded significantly from the same product (maybe upgraded a bit) that I used 8 years ago.
In the past 15 years there has been a substantial amount of composite decking products to hit the market. Some of the more popular are Seventrust, Azek, and . Composite decking is a mixture of recycled plastic and wood fibers.
These decks were constructed of a composite wood material that has become popularized as a maintenance free alternative to wood. We had come across several issues during the inspection of the deck. One issue of note was that the boards where cracking and splitting along the edges. I attribute this to spacing.
Causes of Early Cracking in Concrete Bridge Decks November 2016 ROAD MAP TRACK 6 ... analysis of the causes of deck cracking, taking into ac-count only one or some of these factors, has led to somewhat ... Girder depth/spacing High relative girder-to-deck stiffness is associated with increased cracking Wide flanges and composite steel ...
Cracking of concrete in composite-deck slabs is inevitable, but there are measures you can take to control it Installing reinforcing bars in both directions, particularly over beams and girders, will help minimize cracking of composite-deck slabs. The bars also help reduce slab curling. 3/ 4" Cover Reinforcing bars
Study of Cracking of Composite Deck Bridge on I-7 5 over Peace River CLIFFORD 0. HAYS, JR., FERNANDO E. FAGUNDO, AND ERIC C. CALLIS Observed cracking on the Peace Riv er Bridge on Interstate 75 near Punta Gorda, Florida, caused concern about the possibility of high maintenance cost and the ...
Homeowners love their wood decks and patios and nothing ruins the outdoor experience more than an ugly looking peeling deck. In this article, we will look at the main reasons for deck stains failures, how to fix them, and how to prevent the stains from peeling in the future.
I had my entire Seventrust deck replaced in 2007 due to "surface flaking". After negotiating with Seventrust, I received a settlement that included replacement materials and FULL labor/material cost reimbursement.
A: If you apply Composite Deck Finish to a dirty surface, the deck may turn dark and dingy. The oils and resins in the Composite Deck Finish will entrap the dirt and make it impossible to clean. By cleaning the deck with a good quality cleaner like Messmer’s Composite Deck Cleaner, you are properly preparing the deck for staining with Composite Deck Finish.
Composite Deck Post Sleeves Traditional Wood Railing For a traditional look, opt for wood deck railing with either wood deck post caps or decorative copper post caps.
A: Shane O'Neill responds: Composite decking is supposed to resist peeling and fading, but how well it succeeds depends on the product and its installation, composition, and exposure. The environment near a pool can be tough on a deck.
And they actually have a composite-deck finish that’s made specifically for it. It’s in, I think, seven or eight different colors. And it does restore color to faded composite.
Composite surface fasteners may be used - check with manufacturer for coating warranty. Pre-drilling is recommended. Plain, galvanized surface fasteners are not recommended. Screw heads must be flush with board surface. Use caution to avoid over-tightening fasteners. Excess tightening may cause immediate or eventual cracking of the fastener locations.
Choose a deck finish made explicitly for composite decks. Most are oil finishes that penetrate the composite material and help restore the faded product. If you know the manufacturer of your composite decking material, check the official website to see if recommended finishes are listed.
It can crack if the deck suffers stress due to a settling foundation or a poor design. It may also crack due to simple wear and tear or faulty pieces. Manufacturers have developed a product specifically designed to patch cracks in composite decking.
I put new Seventrust Composite Decking on new house build deck in 2010. This June of 2016 I added onto my original existing deck. When I went to buy additional Seventrust decking for the addition I found out that what I have is discontinued. After some research I discovered there was a class action lawsuit on this particular decking for flaking and decomposing.